Olympus CAMEDIA C-7070 Wide Zoom, Руководство по ремонту

Страница: 18 / 69

C-5 Ver. 1
C. ADJUSTMENT METHOD C-7070 Wide Zoom
Adjustment condition:
1. This adjustment should be carried out in a fairly dark
place so that the shape of the LED spot can be checked.
2. After adjustment, the readjustment is necessary to re-
place the lens, CP1 board, CA1 board and the FPC at the
cabinet top.
3. Do not see the light of AF LED directly.
4. Do not adjust long time.
Adjustment method:
1. Set the camera so that the t
a
rget board is at a distance of
1 meters from LED. (Light up the terget board.)
2. Connect CL301 and CL302. Connect the camera and com
-
puter by USB cable. Connect the camera and the TV
monitor by AV cable.
3. Turn on the power, double-click on the DscCalDi.exe.
4. Click the LCD "Test", and select the "Monitor".
Select the "AF LED".
5. Carry out the pre-focus adjustment. After adjusting, the
target mark will appear on the monitor.
6. Turn off the light of t
a
rget board.
7. Turn the screws on FPC unit to adjust so that the cen-
ter of the LED spot appears inside the circle above the
target mark on the terget board surface.
8. After adjusting, click the LCD "Test", and select the "LCD
OFF". (The lens will be stowed.)
T
a
rget board
LED
spot
Target
mark
70 cm
70 cm
width
of 1cm
black
line
white
or gray
CL302
CL301
[7] Adjust Specifications
1. AF LED Angle Adjustment
[CP1 board (Side A)]
Setting the adjustment mode
1. Open the card cover of the camera.
2. Turn on the power switch. "CARD-COVER OPEN" will be
displayed in the LCD.
3. Push the LCD button and OK button more than 3 sec-
onds simultaneously.
4. Push the right arrow button, and select "STORAGE".
5. "STORAGE/CONTROL" will be displayed.
6. Push the below arrow button, and select "CONTROL".
7. Push the OK button.
8. Close the card cover of the camera.