Olympus CAMEDIA C-470 Zoom, Основное руководство

Страница: 19 / 108

19
En
Power on/off
The camera can be turned on by different operation in “shooting mode”
or “playback mode.”
When you use the camera for the first time, the message saying [Y/M/D]
appears on the monitor. For the details of the setting procedure, see the
separate Advanced manual (CD-ROM).
Never open the battery compartment/card cover, or connect or disconnect the
battery or AC adapter while the camera is turned on. Such actions could
destroy all the data on the card. Once destroyed, data cannot be restored.
When taking pictures (Shooting mode)
How to turn the camera on
Î
Slide the power switch to ON.
The lens barrier opens, the lens
extends, and the subject is
displayed on the monitor.
If the lens does not extend even
when the lens barrier is opened,
there is a possibility that the power
switch is not fully set to the ON
position. Slide the power switch to
the ON position correctly.
To save battery power, the camera automatically enters the sleep mode and
stops operation after about 3 minutes of non-operation. Press any button
such as the zoom button to activate the camera again.
To save battery power, the camera automatically turns off after about 15
minutes of non-operation. To recover the function, slide the power switch to
the OFF position by following “How to turn the camera off,” then turn the
camera on again.
Power switch
Monitor
000e_kihonhen.book Page 19 Tuesday, August 24, 2004 1:49 PM