Shoot
ing bas
ics
2
54
Using the flash
In the auto-flash mode (factory default setting), the flash is designed to fire
automatically when shooting under low light or against strong backlight, but
you can change the flash mode to suit different shooting situations. Select the
flash mode best suited to the light conditions and the effect you want to
achieve.
1
Open the lens barrier fully.
The camera turns on in the shooting
mode.
2
Press .
The current flash setting is displayed.
3
Press
while the current flash
setting is displayed.
Each time you press
, the flash mode
changes in the following sequence:
AUTO -
-
-
.
4
Take the picture.
• The flash working range is approximately 3.4 m/11.2 ft.
• The camera returns to the auto-flash mode (factory default setting)
when the lens barrier is closed. “Saving the settings (All Reset)” (
p.110)
AUtO
