72
Chapter 4
Recording movies (Cont.)
3
Press the shutter button all the way to
stop recording.
●
The card access lamp blinks and the
camera begins storing the movie on the
card.
●
When the card access lamp stops
blinking, the camera has finished writing
the movie to the card. If there is any
space left on the card, the number of
seconds remaining is displayed. You
can start shooting another movie.
●
When the remaining time displayed has
been used up, shooting stops
automatically and the camera starts
writing the movie to the card. This will
happen regardless of whether or not
you press the shutter button to stop
shooting.
●
Shooting is not possible.
T
You cannot record another movie as long as the card access lamp is
blinking.
T
Shooting is not possible while the camera is saving pictures to the
card. When the memory gauge goes off, you can take another shot.
TIPS
●
During movie recording, the flash cannot be used.
Note
