18
1
Attach the string to the lens cap: Pull
the string loop through the hole in the
lens cap. Put the other end of the
string through the string loop.
2
Loosen the strap in both stoppers. Pull
out the ends of the strap from each
stopper, then pull them out of each
ring.
3
Thread one end of the strap
A
through
the string loop (attached to the lens cap
in step 1). Then, thread it through the
camera’s strap eyelet.
4
Thread the end of the strap back
through the ring and stopper as
indicated by the arrows.
5
When you have a length that you like,
pull on the strap in the stopper
B
to
make sure it is securely fastened.
6
Attach the strap to the other strap eyelet
following steps 3 – 5.
Attaching the strap
Strap eyelet
●
Be careful with the strap when you carry the camera, as the strap can easily
catch on stray objects, causing serious damage.
●
Attach the strap correctly as shown so that the camera does not fall off. If
the strap is attached incorrectly and the camera falls off the strap, Olympus
is not responsible for any damages.
Note
A
Ring
B
Chapter 1
Getting star
ted
Stopper
