background image

5

16. Damage  Requiring  Service  —  If  using  the  optional  AC  adapter,  unplug

this  product  from  the  wall  outlet  and  refer  servicing  to  qualified  service
personnel under the following conditions:
a) If liquid has been spilled, or objects have fallen into the product.
b) If the product has been exposed to rain or water.
c) If  the  product  does  not  operate  normally  by  following  the  operating

instructions.  Adjust  only  those  controls  that  are  covered  by  the
operating  instructions  as  an  improper  adjustment  of  other  controls
may  result  in  damage  and  will  often  require  extensive  work  by  a
qualified technician to restore the product to its normal operation.

d) If the product has been dropped or damaged in any way.
e) When  the  product  exhibits  a  distinct  change  in  performance  —  this

indicates a need for service.

17. Replacement Parts — When replacement parts are required, be sure the

service  technician  has  used  replacement  parts  specified  by  the
manufacturer or which have the same characteristics as the original part.
Unauthorized  substitutions  may  result  in  fire,  electric  shock,  or  other
hazards.

18. Safety  Check  —  Upon  completion  of  any  service  or  repairs  to  this

product, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.

19. Heat — The product should be situated away from heat sources such as

radiators,  heat  registers,  stoves,  or  other  products  (including  amplifiers)
that produce heat.

Содержание C-3000 - 3.2MP Digital Camera













































































































































































































































Отзывы: