Olympus BX3-SSU, Инструкция по эксплуатации, Страница: 15 / 24

12
BX3-SSU
8 8
ASSEMBLY
To ensure the performance, we recommend that you have your Olympus representative assemble and adjust
the scanning stage with ultrasonic.
8-1 Assembly Diagram
·
When assembling the scanning stage with ultrasonic, make sure that all parts are free of dust and dirt and
perform the procedures cautiously.
·
Connect only the designated modules. Connecting a non-designated module may cause malfunction.
·
Be sure to set the main switches of the BX3-CBH/IX3-CBH and control box for BX3-SSU to “ ” (OFF) before
connecting the cables.
The following diagram shows only the cable connections associated with the scanning stage with ultrasonic.
When connecting each connector, align the connector orientation correctly and insert the connector all the
way. If a connector is equipped with lock screws, always tighten them firmly.
CAUTION
Stage clips
IX2-SCL
Slide holder
Center plate with
50 mm hole
IX-CP50
Scanning stage for
ultrasonic
BX3-SSU
Microscope frame
BX63F
Control box
(Provided with BX3-SSU)
Control box
BX3-CBH/IX3-CBH
One of
OUT1 to 5
Interface cable
U-IFCBL200
Controller
U-MCZ
Dedicated cable
(Provided with BX3-SSU)
Power cord
XY controller
(Provided with BX3-SSU)
Center plate with
25 mm hole
IX83P1ZF
IX83P2ZF
IX73P1F
IX73P2F
IX51WIF
Downloaded from ManualsNet.com search engine