background image

45MG — Getting Started Guide

3

Do not replace the batteries while the instrument is turned on. Dispose of used batteries 
promptly. Keep batteries out of reach of children. The batteries used in this device may present a 
risk of fire or chemical burn if mistreated. Do not disassemble, heat above 50 °C, or incinerate the 
batteries.

To replace the batteries

1.

Ensure that the power to the 45MG is 
turned off.

2.

Disconnect any other cables 
connected to the 45MG.

3.

Remove the optional protective 
rubber boot, if installed.

4.

Turn the battery door lock half a turn 
counterclockwise to the unlock 
position.

5.

Remove the battery compartment 
cover.

6.

Remove the batteries.

7.

Insert three new batteries into the 
battery compartment, making sure 
to observe the correct polarity for 
each battery.

8.

Ensure that the gasket inside the 
battery compartment cover is clean 
and in good condition.

9.

Reinstall the battery compartment cover on the back of the instrument, push down on the 
bottom of the battery door, and then turn the battery door lock half a turn clockwise to the 
lock position.

 MicroSD memory

card slot

Battery door 

Battery compartment

Three AA-size Batteries

Содержание 45MG









Отзывы: