Olympia Protect 9XXX Series, Инструкция по эксплуатации

Страница: 31 / 40

Registering and Deregistering Sensors / System Extesion
Giu
OPERATING
INSTRUCTIONS
31 Page
Registering Sensors
Up to 32 sensors can be registered on the wireless alarm system.
If you purchase optionally available sensors, such as additional remote
controls, smoke detectors etc., they must be registered manually.
Proceed as follows to register the sensors:
1. Enter the device-specific Entry Code. Confirm it by pressing .
2. Press the button to open the menu. Use the and
buttons to select the Register menu option. Confirm it by
pressing .
3. Search… appears in the display.
4. Activate the sensor to be registered. To do this, please refer to the
description supplied with the sensor.
5. Open Sensor01 or SmokeSensor01
,
for example, appears in the
display
.
You can rename the sensor, if necessary. Confirm it by
pressing .
6. Voice Record appears in the display. Press to retain the
standard message or press to record an individual message.
7. Confirm it by pressing .
NOTE: If you do not confirm it by pressing the
button, recording is automatically ended after
10 seconds.
8. Your individual message is played back. The main menu reappears
in the display.
Deregistering Sensors
1. Enter the device-specific Entry Code. Confirm it by pressing .
2. Press the button. Review appears in the display.
3. Press the buttons and to select the sensor to be
deregistered.
4. Press the button. Delete?
appears in the display.
5. Confirm it by pressing . Empty appears in the display.
6. Press the button twice to exit from the menu.
System Extension
You can order accessories and options for the wireless alarm system via
the following web site
www.olympia-vertrieb.de
Products
Security Products
Wireless Alarm Systems