Olympia Protect 9XXX Series, Инструкция по эксплуатации

Страница: 28 / 40

Monitoring Functions
OPERATING
INSTRUCTIONS
Giu
28 Page
Disarmed Mode
NOTE: When alarm system is disarmed, you can move
freely within the living quarters without trigger­
ing any alarms.
Base unit
1. Enter the device-specific Entry Code. Confirm it by pressing .
Remote control
1. Press the button.
Panic Alarm
You can activate a panic alarm as a deterrent by pressing the
button on the base unit or the button on the remote control unit, de­
pending on the configuration. The panic alarm is triggered immediately
without any delay.
To switch off the panic alarm, enter your 4-digit Entry Code on the base
unit. Confirm it by pressing
. Or, you can press the button on
the remote control.
Emergency Call (SOS)
You can trigger the SOS (emergency call) function by pressing the
button on the base unit or the button on the remote control unit, de­
pending on the configuration. The internal GSM telephone dialling unit is
automatically activated when phone numbers have been stored. The emer­
gency call number is dialled first, then up to 10 stored phone numbers in
succession. A message requests the subscriber called to press the
[1]
button on their phone/mobile. The handsfree function is automatically activ­
ated and enables communication between the caller and subscriber called.
There are three ways to end the SOS function:
a) Enter your 4-digit Entry Code on the base unit and confirm it
by pressing the button.
b) Press the button on the remote control.
c) The subscriber called takes the call, executes a function with­
in 24 seconds (refer to "Activating the Internal Telephone
Dialling Unit with OGM Function") and then ends the call.