Olympia Protect 9XXX Series, Инструкция по эксплуатации

Страница: 20 / 40

Configuration
OPERATING
INSTRUCTIONS
Giu
20 Page
Setting the Date/Time
1. Enter the device-specific Entry Code. Confirm it by pressing .
2. The menu is opened by pressing the Menu button briefly.
3. Select the Date/Time menu option. Confirm it by pressing .
4. Display: 01-01-2010 .
5. Use the keypad on the base unit to enter the day, month and year.
Confirm it by pressing .
6. Display: 00:00 .
7. Enter the time as hour and minute.
8. Confirm it by pressing
. The main menu reappears in the
display.
9. Close the menu by pressing the button.
Individual Outgoing Messages
NOTE: You can record an individual message of up to
max. 10 seconds for each sensor (door/window
contact, smoke detector). The standard mes­
sage is replaced by your individual voice mes­
sage and played when the GSM telephone dial­
ling unit is activated!
Proceed as follows to record an individual messages for each respective
sensor:
1. Enter the device-specific Entry Code. Confirm it by pressing .
2. The menu is opened by pressing the Menu button briefly.
3. Select the Review menu option. Confirm it by pressing .
4. Select the respective sensor required by pressing the and
buttons. Confirm it by pressing .
5. The first letter of the sensor selected flashes. You can rename the
sensor (e.g. BalconyDoor, KitchenWindow, etc.). Confirm it by press­
ing
.
6. Text or numbers which have been entered can be deleted by press­
ing the button.
7. Voice Record appears in the display. Confirm it by pressing
.
8. Speak your individual voice message for the selected sensor into the
unit (e.g. BalconyDoor).
9. Press the button to confirm the message and end recording.
NOTE: If you do not confirm it by pressing the
button, recording is automatically ended after
10 seconds.
10. Your individual voice message is played back. The main menu re­
appears in the display.
11. Close the menu by pressing the button.