4. Scanning stops at each channel on which a signal is received. Now press
the
PTT
button to participate in the call or press the button to end the
automatic channel scan function.
D. Activating/Deactivating the Auto PTT function
When the automatic
PTT
function is activated, users can communicate with
each other without having to press and hold the
PTT
button.
D1. Activating the Auto
PTT
function
1. Press
the
MENU
button.
2. Press
the
+
/
-
buttons until
PA
appears in the display and then press the
button to confirm the selection. The
PA
status currently set, “
ON
” or “
OF
”,
flashes.
3. Press
the
+
/
-
buttons to select
ON
and activate the function.
4. Press the button to confirm your selection and return to the main
screen display.
D2. Auto
PTT
function (“
PA ON
” is selected)
1. Press
the
PTT
button and start talking.
2. After pressing the button longer than 5 seconds, the unit's back-lighting is
switched on and “
TX
” flashes in the display. Release the
PTT
button to
continue the call automatically.
3. Press
the
PTT
button again to end the call and terminate the Auto
PTT
function.
Comments:
Auto
PTT
function is on
z
If you do not press the
PTT
button within 3 minutes, the unit deactivates the
Auto
PTT
function automatically and returns to Standby mode.
z
The VOX function is not available when the Auto
PTT
function is on.
D3. Ending the Auto
PTT
function
1. Press
the
MENU
button.
2. Press
the
+
/
-
buttons until
PA
appears in the display. Then press the
button to confirm. The PA status currently set, “
ON
” or “
OF
”, flashes.
3. Press
the
+
/
-
buttons to select
OF
and deactivate this function.
4. Press the button to confirm your selection and return to the main
screen display.
E. Activating/Deactivating the Monitor function
This function is used to receive all the signals from a channel during poor
transmission.
1. Press
the
MENU
button.
2. Press
the
+
/
-
buttons until
Mon
appears in the display. Then press the
button to activate the Monitor function.
