Olympia Omega 2030CN Скачать руководство пользователя страница 194

Страница: 194 / 222

Solving Problems with Printing Quality

184

Abnormal
areas (white,
black, or
color) appear
in a regular
pattern.

The laser lens is dirty. Clean the laser lens.
A toner cartridge may
be defective.

Remove the toner cartridges with the
color causing the abnormal image.
Replace it with a new toner cartridge.

The drum cartridge is
defective.

Remove the drum cartridge and check
for damage. If it is damaged, replace it.

Image
defects.

The laser lens is dirty. Clean the laser lens.
A toner cartridge may
be leaking.

Remove the toner cartridges and
check for damage. If it is damaged,
replace it.

A toner cartridge may
be defective.

Remove the toner cartridge with the
color causing the abnormal image.

Replace it with a new toner cartridge.

The drum cartridge
may be defective.

Remove the drum cartridge and check
for damage. If it is damaged, replace it.

Lateral lines
or bands
appear on
image.

The machine is not
level.

Place the machine on a flat, hard, level
surface.

The media path is
dirty with toner.

Print several sheets and the excess
toner should disappear.

One or more of the
toner cartridges may
be defective.

Remove the toner cartridges and
check for damage. If it is damaged,
replace it.

The drum cartridge is
defective.

Remove the drum cartridge and check
for damage. If it is damaged, replace it.

Colors look
drastically
wrong.

One or more of the
toner cartridges may
be defective.

Remove the toner cartridges and verify
that the toner is distributed evenly on
each cartridge roller, and reinstall the
toner cartridges.

One or more of the
toner cartridges may
be low or empty.

Check the control panel for an

TONER LOW

X TONER EMPTY

message. If necessary, replace the
specified toner cartridge.

Symptom

Cause

Solution

Содержание Omega 2030CN































































































































































































































Результаты поиска

Содержание Omega 2030CN

Отзывы:

Бренды по названию

Популярные бренды

Olympia Omega 2030CN, Руководство пользователя

Результаты поиска

Содержание Omega 2030CN

Отзывы:

Бренды по названию

Популярные бренды