background image

  OL5800 User Manual

 

 

4  

IMPORTANT SAFETY INSTRUCTIONS 

 

BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD 
ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO 
PERSONS, INCLUDING THE FOLLOWING 

 

1. 

Read and understand all instructions. 

2. 

Follow all warnings and instructions marked on the product. 

3. 

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.   Use a 

damp cloth for cleaning. 
4. 

Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, laundry tub, in   a wet 

basement, or near a swimming pool. 
5. 

Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious  damage to the 

product. 
6. 

Slots and openings in the cabinet and the back or bottom are provided for ventilation. To protect it from 

 

overheating, these openings must not be blocked or covered. The openings should never be blocked by  

placing 

the product on the bed, sofa, rug, or other similar surface. This product should never be placed  

near or over a 

radiator or heat register. This product should not be placed in a built-in installation unless  proper ventilation is 
provided. 
7. 

This product should be operated only from the type of power source indicated on the marking label. If  

you are 

not sure of the type of power supply to your home, consult your dealer or local power company. 
8. 

Do not allow anything to rest on the power cord. Do not locate this product where the cord will be  

damaged by 

persons walking on it. 
9. 

Do not overload wall outlet extension cords, as this can result in the risk of fire or electric shock. 

10. 

Never push objects of any kind into this product through cabinet slots as they may touch dangerous  

voltage 

 

points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on this 

 

product. 

11. 

To reduce the risk of electric shock, do not disassemble this product. Instead, when some repair work is 

 

required, take the unit to a qualified technician. Opening or removing covers may expose you to  

dangerous 

voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is  

subsequently used. 

12. 

Unplug this product from the wall outlet and refer servicing to qualified service personnel under the 

 

following conditions: 

a)  When the power supply cord or plug is damaged or frayed. 
b)  If liquid has been spilled into the product. 
c)  If the product has been exposed to rain or water. 
d)  If the product does not operate normally by following the operating instructions. Adjust only those controls that 

are covered by the operating instructions because improper adjustment of other controls may result in damage 
and will often require extensive work by a qualified technician to restore the product to normal operation. 

e)  If the product has been dropped or cabinet has be damaged. 
f)  If the product exhibits a distinct change in performance. 

13. 

Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote  

risk of 

electrical shock from lightning. 
14. 

Do not use the telephone to report a gas leak in the vicinity of the leak. 

 

 

Содержание OL5800



























Отзывы: