Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Olympia 2012
Page 91
All Rights Reserved!
6.21
Programming foreign currencies
A maximum of 2 foreign currencies can be programmed.
Note:
If you want to operate with the second foreign currency, you must programme the
┣
FC 2
┫
key on the keyboard
(see Chapter 6.33). The
┣
FC 1
┫
key, already setup on the flat keyboard of the CM 980-F at the factory, only
applies to foreign currency 1.
Clarify the following before starting with the actual programming operation:
•
Which foreign currency should be programmed?
•
In which memory location should this foreign currency be programmed?
•
What text is associated with the foreign currency (e.g. the currency abbreviation in accordance with ISO 4217)?
•
What is the exchange rate (foreign currency to local currency)?
Example:
US Dollar should be programmed as the foreign currency in memory location 2. The exchange rate at the
time of programming was 1 EUR = 1.35 USD (native currency = 1 EUR, foreign currency = 1.35 USD).
Input Display
FC
0 1 1
1. Set the key to PRG.
2. Select
programming number 16
(see Chapter 6.1.2).
3. Press
the
┣
CASH
┫
key to confirm
the input.
The first foreign currency memory
location appears in the display.
[FC-01 ]
Native:
0,01
Foreign:
0,01
FC
0 2 1
4. Use
the
┣
CASH
┫
key to switch to
the foreign currency memory loca-
tion.
[FC-02 ]
Native:
0,01
Foreign:
0,01
5. Use
the
┣↑┫
and
┣↓┫
keys to switch
to the [
FC-0x
] text
input area.
[FC-02 ]
6. Press
the
┣
CASH
┫
key to confirm
the input.
FC-02
7. Delete the existing text.
8. Enter the new foreign currency
text (see Chapter 6.2).
2x
then
U
4x
then
US
1x
then
USD
9. Conclude text input by pressing
the
┣
CASH
┫
key.
[USD ]
10. Use the
┣↑┫
and
┣↓┫
keys to move
to the
Native: [ ]
input area.
Native: 0.01
11. Enter the native currency amount.
Native: 1.35
12. Press the
┣
CASH
┫
key to confirm
the input.
Save...!!
Please Continue...
- Continued on next page -