Cash Register CM 910 / 911 / 912
Olympia 2011
Page 38
Specifications subject to change without notice!
5.15
Programming foreign currencies
A maximum of 2 foreign currencies can be programmed.
Note:
If you want to work with a second foreign currency, you must programme
FC 2
on the keyboard (refer to
Chapters 5.20 and 5.20.2). The default
FC
key on the keyboard only applies for foreign currency 1!
Clarify the following before starting with the actual programming operation:
●
Which foreign currency should be programmed?
●
In which momory location should this foreign currency be programmed?
●
What text is associated with the foreign currency (e.g. the currency abbreviation in accordance with ISO 4217)?
●
What is the exchange rate (foreign currency to local currency)?
Example:
US Dollar should be programmed as the foreign currency in memory location 2. The exchange rate at the
time of programming was 1 EUR = 1.35 USD (local currency = 1 EUR, foreign currency = 1.35 USD).
Input Display
=FC 1-
1=
●
Set the key to PRG
●
Select
programme number 16
(refer to Chapter 5.1.2).
●
Confirm by pressing
CASH
.
The first foreign currency memory
location appears in the display.
3#
[FC01 ]
Foreign: 0.01
Native: 0.01
FC 2-
1=
●
Press the
CASH
key to
change the foreign currency
memory location.
3#
●
Use the
and
keys to
move to the text input area
[
FC0x
].
#
[FC02 ]
●
Confirm by pressing
CASH
.
3#
FC02
●
Delete the existing text.
#
●
Enter the new foreign currency
text (refer to Chapter 5.2).
2x
then
3#
U
4x
then
3#
US
1x
then
3#
USD
●
Conclude text input by pressing
the
CASH
key.
3#
[USD ]
●
Use the
and
keys to
move to the input area
Foreign:
.
#
Foreign: 0
●
Enter the foreign currency.
#
Foreign: 1.35
●
Confirm by pressing
CASH
.
3#
Foreign: 1.35
- Continued on next page -
