Home and local codes
Use the appropriate option to store either 1 home code or 5 local codes. This stored information is then used
to display an incoming call number correctly. It will also mean the number is saved in the call log correctly.
Home code
If you are not required to dial your area code for local calls, enter your area code using the home code
option. This will allow the CDP to remove your area code from local calls. It will also add a 1 to calls
outside your area code. This will make it easy for you to make calls when dialing from your caller ID log.
Local codes
If you are required to dial your area code for local calls, enter your local area codes using the local code
option. This will allow the CDP to display the area code for local calls. It will also add a 1 to calls outside
your local area codes. This will make it easy for you to make calls when dialing from your caller ID log.
To access the home or local code option, proceed as follows:
1.
Access the handset settings menu (see page 28) and use
or
as necessary to highlight the home or local code
option.
2.
Press
to select the required option.
3.
Either enter your home code or select and enter up to 5
local codes. Press
to save or
to abort.
4.
Press
to go back through the menus until the
standby screen is displayed.
Reset base station
To reset your handset to the factory settings, proceed as follows:
1.
Access the handset settings menu (see page 28) and use
or
as necessary to highlight the reset option.
2.
Press
to select reset.
3.
Press
to confirm the reset or
to abort.
4.
Press
to go back through the menus until the
standby screen is displayed.
The following settings will be affected and reset to their original values:
O
Your phonebook, speed dial numbers and each handset's redial list will be
unaffected. These lists can be deleted independently using the appropriate menus.
•
Audio settings
Ring type L1 & L2
1
Ringer vol L1 & L2
3
Auto answer
Off
Key click
On
•
Base name
CDP BASE
•
Boost mode
On
•
USER
Page 38
www.olympiaphones.com
GUIDE
Settings
•
Pulse/tone Dialing L1
Tone
•
Pulse/tone Dialing L2
Tone
•
Base redial memory
•
Local code
Deleted
•
Home codes
Deleted
C
C
C
Содержание CDP 24201
Страница 1: ......
