Olympia CC 310.4, Руководство пользователя

Страница: 19 / 76

Appendix
Paper Shredder CC 310.4 / MC 306.2
19
Gi
MC 306.2 CC 310.4
Power supply 220 - 240 V, 50 Hz,
1.3 A 220 - 240 V, 50 Hz,
1.2 A
Power consumption max. 280 W max. 210 W
Troubleshooting
Device does not work Is the power plug con­
nected properly in the
power socket? Insert the power plug in
a properly installed pow­
er socket.
Is the material not drawn
in automatically or does
the cutting mechanism
not start up? Feed the material in so
that the sensor, posi­
tioned in the centre of
the infeed, detects the
material.
Device no longer func­
tions after a longer period
out of service or stops
during operation
(Overheating LED lights
up red). Has the permissible
operating cycle been
exceed? Disconnect the power
plug from the power
socket and allow the
motor to cool down.
Pay attention to the per­
missible operating cy­
cle (refer to
Technical
Data ).
Material jams Has the maximum
capacity of the infeed
been exceed? Pay attention to the max­
imum capacity of the
infeed (refer to
Technical
Data ).
Clear the material jam
(refer to
Reverse Run­
ning and Clearing Resid­
ual Material )
Was the paper drawn
into the infeed straight? Ensure the material is
straight when fed into the
infeed.
Clear the material jam
(refer to
Reverse Run­
ning and Clearing Resid­
ual Material )