Page
4
from
5
2.
Place the plastic part
1.
Open the pre-etched knock out and pass the
cable through
.
3. Place the cable holding accessory and mount it by
tightening the screw with the included grommet.
5. Place the mounting accessories in the wall
and tighten the mounting screw figure 1 step 3.
6. Place the plastic cover.
Wall in bottom view
Wall mounted installation
using the special mounting
brackets contained in the
package.
Flag mounted installation on
a wall using the special
mounting bracket contained
in the package.
2.
Place the single mounting plastic part
3.
Tighten the mounting screw
.
1.
Open the pre-etched knock out and pass the cable
through
.
5. Place the mounting accessories in the wall
and screw the mounting screws
Wall mounting
4.
Connect the wires to the included terminal block and
place it in the plastic mounting part
.
6
.
After finishing the installation,
secure
the cable
with a
suitable
cable detention
bracket
(not included)
to ensure
immobilization of the cable at a distance of no more than
5cm from the
luminaire
’s c
able entry
.
4.
Connect the wires to the included terminal block and
place it in the plastic mounting part
.
6
Electric connection and Eco Light dimensions in mm
DLD-28 : 305(a) x 95(b)
DLD-34 : 365(a) x 165(b)
DLD-44 : 465(a) x 215(b)
b
60mm
a
L N
40-250V DC-AC/50-60Hz
P
ackage
c
ontents
The package contains:
1. The
illumination
sign
2. The instructions
manual
3.
Plastic b
ag
with
support
ing
material
s
.
P
ackage
c
ontents
922604410_
09
_029
