8/10/2015
13
921458000_09_003
Enter the hours and minutes that we want the timer to activate and we see:
Select the day of the week that we want the timer to operate. If we
select
«EVERY DAY» it will operate all of the days.
By pressing the (*) key we see:
We make the required selection of the function that we want the
timer to do and press the key (*). The system confirms the
selection.
The event memory logs the arming or disarming of the system but
also shows that the event has been launched by a timer.
Finally if we want to delete a timer select
«DELETE TIMER» and the screen shows:
Enter the number of the timer that we want to delete.
The following page show a series of specialized information used for the installation. This information
must be completed with the cooperation of the installation technician and must be stored in a safe
place. This information will help repair the system in case of fault conditions.
Finally there is the selection
«Reset». When this option is selected then all warning are cleared form
the main screen as well as all the faults that have occurred. For example, if the was a message that
showed of an SMS send failure then this will be cleared. If the battery has been disconnected and is
still disconnected then this information cannot be cleared because the event is still valid.
_
CHANGE DAY OF WEEK _
EVERY DAY
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
DELETE TIMER
SELECT FROM 01-10
- -
_
CHANGE ACTION _
ARM ALL
DISARM ALL
ARM Α
ARM Β
ARM C
DISARM Α
DISARM Β
DISARM C
Содержание BS-458
