Olymberyl HF-217 BabyGabrie Скачать руководство пользователя страница 17

Страница: 17 / 17

17 ~

Olymberyl Warranty

Warranty Policy & Procedures

Olymberyl guarantee that your product will be free from defective parts, materials and

workmanship at the time of purchase by the original consumer for a period of 1 year for

components (parts and labour), excluding consumable parts and 5 years for the bodywork

casing and door (parts and 1 year labour)

The warranty does not cover parts deemed to be consumables. These include paint, fire-

bricks, vermiculite panels, smoke deflection plates(baffle plates), gaskets, rope seals and

glass.

Olymberyl will repair or replace at its option any stove or stove part thereof found to be

defective under these terms.

Your stove is guaranteed against defects subject to the following conditions.

The stove must have been installed by an appropriately qualified installer and upon

completion of the installation a certificate of compliance to local building regulations

issued.

The sales receipt or invoice must be kept as proof of purchase.

The serial number of the stove must not be damaged or missing.

You must not have used the stove to burn any of the prohibited fuels listed.

The stove must have been continuously kept in a serviceable condition and you must

not have allowed the stove to corrode.

You must not have modified the construction of the stove in any way

The stove must not have been used for commercial purposes (e.g. rented or holiday

accommodation, public bar, where the stove’s operation could be subject to abuse).

Limits of warranty

This warranty is not transferable and applies to the original retail purchaser only. It does

not cover the failure of the appliance due to accidental damage, misuse or abuse, modifi-

cation, illegal installation, repairs (other than those by the authorised dealer) or failure to

maintain the stove in a serviceable condition.

Under no circumstances shall Olymberyl be liable for any incidental or consequential dam-

age claims of any nature whatsoever arising from the non-conformance of the stove un-

der the terms of the manufacturer’s warranty. These include loss of profit, commercial

losses, transport costs and damage during transport, costs in connection with any dis-

mantling and reassembling of the stove and its installation components.

Содержание HF-217 BabyGabrie


















Результаты поиска

Содержание HF-217 BabyGabrie

Отзывы:

Похожие инструкции для HF-217 BabyGabrie

Бренды по названию

Популярные бренды

Olymberyl HF-217 BabyGabrie, Руководство пользователя

Результаты поиска

Содержание HF-217 BabyGabrie

Отзывы:

Похожие инструкции для HF-217 BabyGabrie

Бренды по названию

Популярные бренды