Exploded view of all parts necessary to complete the Roof Section.
Identify all parts prior to starting.
Ridge Board
Ridge Board
Metal Ridge Board Connector
8 - 3/4” Screws
C. Rafter and Roof Section
Parts (Step 35)
Ridge Board Long
(3/4” x 4 1/2” x 84”)
x 2
Ridge Board Short
(3/4” x 4 1/2” x 52 1/2”)
x 2
Hardware (Step 35)
SS2
- 3/4” Screws
x 16 total
35.
Locate
Ridge Boards Long
&
Ridge Boards Short
and attach together with
Metal Ridge Board Connector
using
8 - 3/4” silver screws
. Position
Metal Ridge Board
Connector
evenly on
Ridge Boards
. Total length when
connected is 136 1/2”. Complete two sets.
Roof Rafters
(9 per side)
18 Total
Soffits (4)
1/2” x 4 1/2” x 68 1/4”
Roof Gussets (3)
Roof Battens 3/4” x 3 1/2”
x 45 1/2” (8 pcs) - Middle
Rafter Brackets (10)
Foam
Enclosure
(strips)
Metal Roof
Screws (42)
Metal Roof
Cap (3)
Metal Roof
Panels
(8)
Ridge Boards (2)
52 1/2”long
Ridge Boards (2)
84”long
Roof Battens 3/4” x 3 1/2”
x 49 1/4”(16 pcs)- Outside
Facia Nailing
Strips (4)
Batten
Spacers (12)
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 25