58.
Locate 4
Metal Roof Panels
and 4
Metal Roof Hangars
. To
temporarily hold the
Metal Roof Panels
in place, hook a
Metal Roof
Hangar
onto the lowest Batten, approximately where the center of
the panels will be. Place first
Metal Roof Panel
on Battens and into
Hangar. Do not fasten panels down until
Step 62
. Place remaining 3
panels and hangars on the same way. Metal Roof Panels will overlap
eachother.
Parts (Step 58)
Metal Roof Panels
(39” wide x 61” long)
x 4
Hardware (Step 58)
Y38
- Metal Roof Hangars
x 4 total
57.
Repeat
Steps 51 - 56
to complete Batten Section on opposite side of roof with remaining
Battens
and
Batten Spacers
.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 33