background image

1. Customer Service 
2. On Time Shipping 
3. Motor Freight Delivery 
4. Quality of Materials 
5. Assembly Manual 
6. Overall Satisfaction. 

 
 
Please call, write or email us at: 

Canadian Address 
9393 287th Street 
Maple Ridge, British Columbia 
Canada     V2W 1L1

United States Address 
P.O. Box 96 
Sumas, Washington 
USA    98295

Outdoor Living Today

Toll Line: 1.888.658.1658         |      Fax: 1.604.462.5333      |      [email protected]

Page 37

Congratulations on Completing 
your 8 x 8 Sunshed (Metal Roof)!

The materials contained in this Assembly 
Manual may be downloaded or copied  
provided that 

ALL

 copies retain the copyright 

and any other proprietary notices contained 
on the materials.  No material may be  
modified, edited or taken out of context such 
that its use creates a false or misleading 
statement or impression as to the positions, 
statements or actions.

Note: 

 Our Sheds are 

shipped as an unfinished 
product.  If exposed to the 
elements, the western red 
cedar lumber will weather to 
a silvery-gray color. If you 
prefer to keep the cedar 
lumber looking closer to the 
original color, we suggest 
that you treat the wood with 
a good oil base wood stain.  
You may also wish to paint 
your new shed rather than 
stain it.  In both cases we 
recommend that you  
consult with a paint and 
stain dealer in your area for 
their recommendations.

We hope your experience  
constructing your Garden 
Shed has been both positive 
and rewarding.

We value your feedback and 
would like to hear back from 
you on how well we are 
doing in the  following areas:

Содержание FJ Bevel






































Отзывы: