Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
84.
Attach remaining
Side Facia
to roof rafter ends as per
Step 82.
85.
Attach
Facia/Trim Detail Plates
and
Pentagon Detail Plates
to cover seams where facia trim
pieces come together. Secure each with 4 - 1 1/2” finishing nails.
83.
Attach Long
Front and Rear Facia
(3/4” x 3 1/2” x 79 1/4” angle cut on ends) to batten ends
and Outside Ridge Cap edge with both 1 1/2” finishing nails and 1 1/4” screws. Use 2 screws where
Outside Ridge Cap and Facia meet. Line Facia up so it is even with rafter ends.
Outside Ridge Cap
Page 33