Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 29
49.
Before fully fastening Metal Roof Panels down, remove the Metal
Roof Hangers and insert
Foam Enclosures
between Metal Roof Panels
and Battens at the bottom of the roof. Enclosures will prevent moisture
and unwanted bugs, etc from entering your shed through here.
Parts
Foam Enclosures
(x 4)
Important:
Remove Metal
Roof Hangers
50.
Using
12 - 2” Metal Screws
and 1/4” Nut Driver, secure Metal Roof
Panels down to lower 2 rows of Battens. Leave the top row unsecured for
now to secure Ridge Cap later in
Step 53
. Tighten screws in middle row
that were partially secured in
Step 48
. Do not overtighten!
Hardware (Steps 50 - 51)
2” - Metal Roof Screws
x 30
total
Foam Enclosures
(x 4)
Screw into center of
Battens.
51.
Repeat
Steps 45 - 50 t
o complete opposite side of Metal Roof.