Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 27
44.
Repeat
Steps 38 - 43
to complete Batten Section on opposite side of roof with remaining
Battens
and
Batten Spacers
.
45.
Locate 4
Metal Roof Panels
and 4
Metal Roof Hangers
. To
temporarily hold the
Metal Roof Panels
in place, hook a
Metal Roof
Hanger
onto the lowest Batten, approximately where the center of the
panels will be. Place first Metal Roof Panel on Battens and into
Hanger. Do not fasten panels down until
Step 50
. Place remaining 3
panels and hangers on the same way. Metal Roof Panels will overlap
each other.
Parts
Metal Roof Panels
(39” wide x 61” long)
x 4
Hardware
Metal Roof Hangers
x 4 total