![background image](http://html.mh-extra.com/html/olt/8x4-spacesaver-garden-shed/8x4-spacesaver-garden-shed_assembly-manual_732291002.webp)
Thank you for purchasing our 8x4 SpaceSaver Garden Shed Double Door.
Please take the time to identify all the parts prior to assembly.
Parts List:
A. Floor Section
1 - 45 ½” x 75” -
Large Floor Frame
(2 Joists unattached)
1 - 45 ½” x 21” -
Small Floor Frame
(2 Joists ATTACHED)
2 - 1 ½” x 3 ½” x 72” -
Floor Joists
(Steps 1 - 2)
5 - 1 ½” x 3 ½” x 45 ½” -
Floor Runners
(Steps 3 - 5)
1 - 5/8” x 45 ½” x 75” -
Plywood Flooring
1 - 5/8” x 45 ½” x 21” -
Plywood Flooring
(Steps 6 - 8)
B. Wall Section
4 - 1 ½” x 2 ½” x 45 ½” -
Wall Plates
4 - 45 ½” x 75” -
Wall Panels
2 - 12” x 73” -
Narrow Wall Panels
(Steps 9 - 18)
2 - 2” x 3 ½” x 6 ½” -
Door Headers - Short (Dado on edge)
1 - 2” x 3 ½” x 78” -
Door Header - Long
Dado cut on edge- Aluminum Support Strip Attached
2 - 1 ½” x 3 ½” x 73” -
Door Jambs - Vertical
(Steps 19 - 21)
2 -
Top Triangular Siding Pc for Angle Wall Extendors (L/R)
2 - 4
5 ¼
” -
Angle Wall Extendors (L/R)
2 - 9” x 45 ½” -
Wall Extendors
(Steps 22 - 28)
1 - ¾” x 3 ½” x 70” -
Horizontal Wall Cleat
1 - ¾” x 3 ½” x 21” -
Horizontal Wall Cleat
(
Step 29)
C. Rafter & Roof Section
6 - 1 ½” x 2 ½” x 54” -
Rafters
2 - ½” x 3 ½” x 48” -
Front Soffit
2 - ½” x 3” x 48” -
Rear Soffit
(Steps 31 - 36)
2 -
Rafter/Facia Nailing Plates
- ¾” x ¾” x 48”
(Step 37)
2 -
Roof Panels
- 51” w x 56” d (1 - Left 1- Right)
(Steps 38 - 40
)
4 - 5 ½” Wide x 16” to 18” long -
Filler Shingles
(Steps 41 - 44)
D. Miscellaneous Section
(Skirting, Trim, Door, Facia & Misc. Parts
)
6 - ¾” x 4 ½” x 45
¼
” -
Bottom Skirting
(Bevel Siding)
(Steps 47 - 50)
8 - 7/8” x 2 ½” x 36” -
Corner Filler Trims
2 - 7/8” x 2 ½” x 10” -
Rear Center Corner Filler Trims
(Steps 51 - 53)
2 - ½” x 3 ½” x 79” -
Vertical Door Trims
(Steps 54 - 55)
2 - ½” x 5 ½” x 79” -
Front Corner Trims
2 - ½” x 5 ½” x 88 ¾” -
Rear Corner Trims
2 - ½ x 2 ½” x 80” -
Side Front Corner Trims
3 - ½” x 2 ½” x 88 ¾” -
Side Rear Corner & Middle Trims
(Steps 56 - 59)
1 - ½” x 1
¼
” x 64” -
Horizontal Door Trim
2 - ½” x 2 ½” x 8 ½” -
Horizontal Narrow Wall Trims
(Step 60)
2 - 31
½”
X 72” -
Full Doors
(Steps 61 - 65)
2 - ½” x 4” x 54 1/8” -
Side Facia
(Angle Cut Ends) - reverse
4 - ½” x 4” x 50 ½” -
Front and Rear Facia
(Steps 66 - 68)
2 - ½” x 4 ½” x 51 5/8” -
Roof Ridge Boards
(Step 69)
2 -
Detail Facia Plates
(4” high)
(Step 70)
2 -
½”
x
½”
x 28 7/8” -
Upper Interior Door Trims
4 -
½”
x
½”
x 35 7/8” -
Side
Interior Door Trims
(Steps 71 - 72)
1 - 1 ½” x 2 ½” x 6” -
Upper Door Stop
1 - ¾” x 2 ½” x 64” -
Lower Door Stop /Floor Threshold
(Steps 73 - 74)
1 - x 2
½”
x 70” -
Interior Vertical Door Flange
(Steps 75 - 76)
1 - 45 ¼” - Extra Piece of Bevel Wall Siding - Use if wall panel
siding is damaged or to shim floor or door.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 2
Note: All Trim, Facia and Bottom Skirting pieces will be positioned rough face out when installed.