Olsen HTL-100, Инструкция по установке, эксплуатации и обслуживанию

Страница: 15 / 44

15
AIR FILTER RACK INSTALLATION
Tank installation must conform to local requirements.
THE AIR FILTER RACK IS A FIELD INSTALLED COMPONENT. AFTER INSTALLATION
THE RACK MUST BE SEALED (WITH DUCT TAPE OR EQUIVALENT) TO MINIMIZE AIR
LEAKS. THIS IS THE RESPONSIBILITY OF THE INSTALLER.
The air filter rack is shipped uninstalled inside the furnace. This way the owner can install it in
the position that he wants. There are 3 possible locations to install the air filter rack which are:
bottom left side, bottom right side and under the furnace. Follow the instructions below to
install the air filter support properly.
Step 1: Slide air filter spacer inside the outside filter rack.
Step 2: Screw in the 4 screws to hold these two parts together.
Step 3: Slide filter holder door and filter door.
Step 4: Use the 2 remaining screws to maintain the filter door in place.
1 2
3 4
4 X
2 X
Outside filter
rack
Door
Holder
Air filter
Spacer
Filter
Door
Bend must be
facing out