23
Charts of OSD Adjustment Functions
Main menu continued
Management
Scaling
Scaling of the input signal
Full
Displays the image on the full screen
1:1
Will display the input without any scaling. For instance a resolution of 640x480
will be displayed over the corresponding number of pixels in the center of the
screen.
4:3
Will scale the picture to 4:3 format.
5:4
Will scale the picture to 5:4 format.
16:9
Will scale the picture to 16:9 format.
16:10
Will scale the picture to 16:10 format.
OSD Display
Positioning of the OSD on the display.
H. Position
Move position of the OSD display horizontally.
V. Position
Move position of the OSD display vertically.
Language
Select language for OSD. Returns to Main Menu and will from then on show
the OSD in the selected language. You can choose between English, French,
German, Italian, Spanish or Japanese.
Key lock
A function with which you can lock the OSD menu to settings you have made.
When you then try to enter into the OSD you will stop at source menu. To enter
into this function you must click on the OSD wheel 3 times within 2 seconds.
You also do the same when you want to un-lock the Key Lock.
Bright bar
Special setting used to select if the setting bar for Brightness adjustment shall
be shown on the monitor or not. Active only for when you adjust the brightness
by turning the control wheel without having entered the OSD menu. You select
YES or NO if it should be shown or not.
ALC
Automatic Luminance Control (ALC) is a function which can be set to ON or
OFF. When set to ON it will automatically increase the Brightness setting to
off-set the wear on the backlight lamps. It has been developed mainly for when
you select Clear base Barten color mode and is always ON in that mode. It will
make the monitor to better comply with the DICOM requirements during the
full life of the product and not only at the time of delivery. In other color modes
you can set it to ON or OFF but since you have the ability to manually adjust
brightness in these color modes the recommendation is to set it to OFF.
Recall
If you execute Recall the monitor will be reset to values that are default values
at time of delivery.
Mute
You can set this to ON or OFF and the function is to switch off the speaker
sound.
Volume
You can adjust the sound volume from the built in speakers.
Monitor info
This will show some information of the monitor which are useful for service. The
information contains the following: Model number, Firmware version, Operating
Hours, ALC check, Dimming check, Resolution and Color mode.
*1 Only available if the monitor input source is VGA
*2 Only available if the monitor input source is S-video or BNC.
