22
Charts of OSD Adjustment Functions
When you enter the OSD you first come to the menu for selection of input so, if you have 2
sources connected (i.e. PC and camera) you can quickly switch from one source to the other.
When you click on another source you will leave the OSD system. If you want to proceed to the
regular Main Menu you must choose “MAIN MENU”.
Source selection
• DVI-I VGA
Selects VGA
• DVI-I DVI
Selects DVI
• VIDEO S-video
Selects S-video
• VIDEO BNC
Selects Composite video
• MAIN MENU
Continue to Main Menu
Main menu
Exit
Exit OSD Menu, in sub menus ’Exit’ will move you up in the tree structure.
Auto setup *1
Adjust monitor to analog signal from graphics card.
Image OK?
If you answer YES then you will exit the menu. If you answer NO, proceed to Clock /
Phase menu.
Brightness
Adjust brightness level. See also special note on brightness adjustment in special
situations.
Contrast
Adjust contrast of the monitor. Not active when Clear base Barten color mode has
been selected.
Display *1
H. Position
Adjust horizontal screen position.
V. Position
Adjust vertical screen position.
Hue *2
Adjust the hue of the color settings.
Color mode
Cool
Select a cold color temperature of about 9000K.
Neutral
Select a neutral color temperature of about 6500K.
Warm
Select a warm color temperature of about 5500K.
User
In a separate sub-menu you can set individual values for Red, Green and Blue.
Clear base Barten
A special color mode intended for viewing of X-ray pictures. Has a preset greyscale
curve in accordance with the DICOM standard. Automatically sets the monitor to
brightness of about 170 candela and color temperature of about 6500K. When set to
this mode the OSD functions for Brightness, Contrast, Black Level are in-activated. It
also locks ALC to ON.
Clock/phase *1
Clock
Fine tune video signal for positioning of the picture horizontally on the screen.
Phase
Adjust Phase frequency to control flickering or horizontal waves on the screen.
Saturation *2
Adjust the saturation of the color settings.
Black level
Adjust the offset level for black color, inactive when Clear Base Barten color mode is
selected.
