4. Designation of bolts:
-
-
-
-
-
-
-
-
-
-
-
hexagon-socket cap screw Ø12-bending plate – 2 pcs
bending machine arm Ø12x25 – 2 pcs
blocks for S- and C-parts Ø12x25 – 1 pc
clamp for half-rings Ø12x40 – 2 pcs
half-ring Ø12x35 – 2 pcs
blocks for angle bending Ø12x30 – 4 pcs
small wheel Ø12x30 – 1 pc with adjusting nut
nuts Ø12 – 5 pcs
twisting machine clamp Ø12x30 – 2 pcs or 12x25
twisting machine end stop Ø12x30 – 2 pcs or 12x25
bending rolls Ø12x30 – 2 pcs or 12x40
5. Operation.
The bending machine can be operated by an adult who has read this manual, the
occupational health and safety regulations and the Operation & Maintenance Manual. The
bending machine is operated by two persons, a bender and an assistant, when bending long
bars or a bender alone when bending short bars.
6. Bender’s duties:
The bender should fix and fasten the pole to the floor and the bending equipment with
metal bolts with the help of two workers.
4