STEP 2: Insert the male ends of the bar into the female ends of the seating platform as shown in Figure 7.
STEP 3: Align the mounting holes and insert the front bar attachment pins (M.) (Refer to Figure 1) as shown in Figure 8.
STEP 4: With the front bar attachment pins (M.) inserted, engage the safety springs as shown in Figure 9.
OL’ MAN MULTI-VISION TREESTANDS FOLDING/CARRYING
STEP 1: Locate the seating platform (A.) (Refer to Figure 1) and the standing platform (B.). Lean the seating platform (A.)
against your thighs as shown in Figure 10 and open the spreader arms. Make sure the net seat (G.) is all the way down toward the
ground as shown in Figure 10. Locate the standing platform (B.) and close the spreader arms as shown in Figure 11.
STEP 2: With the seating platform spreader arms open, the net seat down and the standing platform spreader arms closed, slip the
standing platform into the net seat as shown in Figure 12.
STEP 3: With the seating platform (B.) nestled in the net seat (G.), close the seating platform spreader arms down over the
standing platform (A.) as shown in Figure 13.
STEP 4: With the seating platform spreader arms closed, wrap the packing strap (O.) across the seating platform (B.) and over the
seating platform spreader arms as shown in Figure 14.
STEP 5: Slip your arms through the shoulder straps (L.) (Refer to Figure 1) and your ready to backpack your Ol’ Man CTS
Climber.
OL’MAN MULTI-VISION TREESTAND NO- SLIP
SECURITY STRAPS
Your new stand is equipped with two (2) “No-Slip Security Straps”
(I.) as shown in Figure 1. These security straps are designed to
stabilize your CTS Climber. They must be connected at
all times when at climbing height. Both the standing and seating
platforms (A. and B.) of your Ol’Man Multi-Vision Treestand have
factory installed “No-Slip Security Straps” (I.). These straps are
located on the spreader arms (D.) (Refer to Figure 1). Once you have
reached your desired climbing height, these straps must be connected
to the side of the tree trunk that faces you (Refer to Figure 1). Secure
the seating platform (B.) “No-Slip Security Strap” (I.) first by
inserting the male end of the buckle into the female portion of the buckle as shown in Figure 15. Pull the tag-end of the “No-Slip
Security Strap” (I.) to tighten as shown in Figure 16. Repeat this operation for connecting the standing platform (A.) “No-Slip
Security Strap” (I.). Note: The length of the “No-Slip Security Straps” (I.) is adjustable by sliding the male side of the buckle up
or down the 1-inch webbing. NOTE: You must disengage the straps prior to attempting to climb down.
