Olivetti OLIBOOK S1500, Руководство пользователя

Страница: 33 / 78

Power System 3 - 11
Getting Started
3
The Power-On Self Test (POST)
When you turn ON the Notebook PC, it will first run through a series of software-controlled diagnostic tests called the
Power-On Self Test (POST). The software that controls the POST is installed as a permanent part of the Notebook PC’s
architecture. The POST includes a record of the Notebook PC’s hardware configuration, which is used to make a
diagnostic check of the system. This record is created by using the BIOS Setup program. If the POST discovers a difference
between the record and the existing hardware, it will display a message on the screen prompting you to correct the
conflict by running BIOS Setup. In most cases the record should be correct when you receive the Notebook PC. When the
test is finished, you may get a message reporting “No operating system found” if the hard disk was not preloaded with
an operating system. This indicates that the hard disk is correctly detected and ready for the installation of a new
operating system.
Self Monitoring and Reporting Technology
The S.M.A.R.T. (Self Monitoring and Reporting
Technology) checks the hard disk drive during POST and
gives a warning message if the hard disk drive requires
servicing. If any critical hard disk drive warning is given
during bootup, backup your data immediately and run
Windows disk checking program. To run Window’s disk
checking program: click Start > select Computer > right-
click a hard disk drive icon > choose Properties > click the
Tools tab > click Check Now > click Start. You can also
select “Scan ... sectors” for more effective scan and repair
but the process will run slower.
IMPORTANT! If warnings are still given during bootup after running a software disk checking utility, you
should take your Notebook PC in for servicing. Continued use may result in data loss.