E-6
(3) Remove the cover from the caster located on
the front side of the finisher (one screw).
(4) Remove the rear cover from the finisher (10
screws).
(5) Remove the cover from the caster located on
the rear side of the finisher (one screw).
(6) Adjust the height of the four casters to align the
mark on the lever with the screw hole on the
finisher.
(7) To install the covers and other parts removed
in step (2) to (5), reverse the removal proce-
dure.
(8) Connect the two connectors removed in step
(1) and secure the cord with a cord clamp.
(9) Install the finisher on the machine.
A0HRIXC033DA
A0HRIXC034DA
A0HRIXC035DA
A0HRIXC036DA
A0HRIXC043DA
Screw hole
Mark
Installation Manual
Y111090-1
