E-3
III. Installation procedures
1. Turn off the machine and unplug the power cord
from the power outlet.
2. Remove the user’s guide holder from the
machine.
3. Remove the output tray if it is mounted on the
machine.
* Remove it while pushing the claws of the output
tray in the direction of the allow
➀
shown on the
illustration and unhook.
4. Peel seals off the machine (two seals).
5. Remove the cover from the main body as shown
in the illustration (one screw).
6. Remove the protective tapes of the horizontal
transport unit.
7. Attach the furnished mounting plates C (left) and
D (right) to the upper left side of the main body
(two furnished screw B’s each).
A0HRIXC013DA
A083IXC006DB
➀
➀
A083IXC007DA
Seal
A083IXC033DA
A0HRIXC015DA
A0HRIXC017DA
Y111090-1
Installation Manual
