4
3.
To confirm the setting, press the key:
The display shows from left to right: the reference number
which identifies the messages present on the list of mes-
sages received (from the oldest message to the most
recent one), the
icon for messages still unread,
the correspondent's telephone number, the text of the
message or part of it, and the date and time.
To show all the message-related data and the text of the
message on the fax machine, press once the keys:
|
/
}
To stop the text on the display, press again the keys:
|
/
}
If you wish to select the displayed message, skip to step
5, otherwise move on to the next step.
4.
To find in the above-mentioned list the message that
you wish to select, press the keys:
5.
To select the message, press the key:
The display shows:
SMS RECEIVED
DELETE
To return the fax machine to its initial stand-by mode,
skip to step 8, otherwise go on with the procedure.
You can also choose one of the following options: "AN-
SWER", "SEND", "EDIT" or "PRINT".
ANSWER: to answer a message received (see proce-
dure below).
EDIT and SEND: to edit and send a message again
(see later on "
To delete/edit/send again a message
(SMS)
").
PRINT: to print the data concerning the message you
have just selected and the text of the message (see "
To
print every single message within a list
", section
"
The lists
").
7.
To see one of the other available options, press the
keys:
8.
To confirm the setting, press the key:
9.
To return the fax machine to its initial stand-by mode,
press the key:
T
O
RECEIVE
MESSAGES
(
SMS
)
The fax machine can receive up to 30 messages (SMS). When
a message (SMS) is received, the "
" led starts blinking,
the fax machine, if previously programmed, sends out an
acoustic signal and the message "SMS RECEPTION" and
then the
icon appear on display.
As in message transmission, you can set some parameters to:
-
ensure
the correct operation of SMS service if you
have more than a telephone set connected to the
same telephone line
(see later on "
For an appropri-
ate message (SMS) reception if you own more than
one telephone set and only one telephone line
").
-
configure the fax machine
to notify the reception of a
message through an acoustic signal
(see later on "
To
configure the fax machine for notifying the recep-
tion of a message (SMS) through an acoustic sig-
nal
").
i m p o r t a n t
To make sure that SMS messages will be received
, check
that the fax machine is set to connect to the telephone line
after
at least 2 rings
. See the "
To change the number of
rings
" section of the "
More sophisticated operations
"
chapter of the fax machine user's manual.
T
O
READ
A
MESSAGE
(
SMS
)
RECEIVED
When the
icon appears on display, it means that
you have received one or more messages (SMS). At
this point, if you want to read them, you must:
1.
Press the key:
The display shows:
MESSAGES MENU
SMS RECEIVED XX
"XX" is the number that appears in the lower right-hand
side corner and it indicates the total number of mes-
sages received (max. 30). It is useful if you want to
know how many messages you have received and,
therefore, how many you can still receive.
2.
To confirm the setting, press the key:
The display shows:
SMS RECEIVED
DISPLAY LIST
If "MEM ALMOST FULL", "DELETE REC. SMS", ap-
pear on display, it means that the memory for mes-
sages received already contains 28 messages, there-
fore, it is almost full. It is advisable to delete some mes-
sages from this memory. See "
To delete/edit/send
again a message (SMS)
".
If, on the other hand, "MEMORY FULL", "DELETE REC.
SMS", appear on display, it means that the memory for
messages received is full. In this case, you must delete
at least one message from this memory. See "
To de-
lete/edit/send again a message (SMS)
".
