42
5. To confirm the selection, press the key:
The display shows:
TYPE TIME
HH:MM
From here on, proceed as described in “
Transmitting a
document in polling mode
”.
P
REPARING
THE
DOCUMENT
FOR
TRANSMISSION
(
POLLING
TRANSMISSION
)
1. Place the original document in the ADF.
The display shows on the top line:
DOCUMENT READY
and on the bottom line, the default contrast value: NORMAL.
The initial resolution value (even if it is not shown on the
display) is: “
” (standard).
If necessary, change the contrast and resolution values (see
“
Setting contrast and resolution
”, chapter “
Basic
transmission and reception operations
”).
2. Press the key:
until the display shows:
POLLING TX
3. Twice press the key:
The second line of the display shows: “POLLING TX SET”.
Note
You can delete the polling operation that has been set up.
1. Do so by removing the document from the ADF or by pressing the
key.
Содержание Fax-Lab 480
Страница 1: ...INSTRUCTIONS Ink Jet Fax Fax Lab 460 480...
Страница 62: ......
Страница 64: ...259732J...