Olivetti Fax-Lab 460, Инструкция по эксплуатации

Страница: 53 / 64

47
M
AINTENANCE OPERATIONS
Note
If you have replaced the print cartridge because the ink ran out ,
when the print cartridge compartment cover and the operator console
are closed, the fax machine will automatically recognize that the print
cartridge has been replaced and the
display will show the message
“NEW PRINT CART.? 1=YES 0=NO”. Set the value 1 .
At this point, the fax machine automatically cleans the print
cartridge and tests the nozzles , printing out the result of the
diagnostic test. From this point on proceed as described in “ Delivery
contents, connecting up and first-time operation ”.
If you replaced the print cartridge because of a deterioration in
printing quality , proceed as follows:
1. Press the key
until the display shows:
CART. MAINTEN.
2. Press the key:
The display shows:
NEW CARTRID: ON
3. Press the key:
The display shows:
CLEANING: ON
The fax machine cleans the print cartridge and tests the
nozzles, printing out the result of the diagnostic test.
From this point on proceed as described in “ Installing the
print cartridge “ in chapter “ Delivery contents,
connecting up and first-time operation ”.
R
E
-
ENABLING THE PRINT CARTRIDGE AND
CHECKING THE NOZZLES
If, when using the fax machine normally, you notice a
deterioration in print quality , you can quickly re-enable
the print cartridge and test the nozzles by following a
procedure that ends with printing out of the diagnostic test
result.
1. Press the key
until the display shows:
CART. MAINTEN.
2. Press the key:
The display shows:
NEW CARTRID: ON
3. To program the other “NEW CARTRID: OFF” option, press
the key:
/
R
EPLACING PRINT CARTRIDGE
1. Flip open the console (1).
2. Lift the print cartridge compartment cover using the lever (2).
3. To release the print cartridge, loosen the strap.
4. Pull the print cartridge from its seat (3).
5. Remove the new print cartridge from its package and, holding it on
both sides, peel off the film covering the nozzles (4).
Attention!
Do not touch the nozzles or electrical contacts (5)
6. Replace the print cartridge in its seat (6).
Ensure that the electrical contacts face downwards.
7. Push the print cartridge until it clicks into place, confirming correct
seating (7).
8. Close the print cartridge compartment cover and the console.