Olivetti Fax-Lab 270, Руководство пользователя

Страница: 9 / 12

7
T
O STOP UNAUTHORIZED PERSONS FROM
READING SMS MESSAGES
As mentioned previously, you can stop anyone from read-
ing the messages that you have received without your
authorization.
This security function is activated by programming confi-
dential mailboxes (max. 4 alphanumeric characters) and
passwords (4 obligatory digits) which the fax prompts you
for whenever an attempt is made to access the mailboxes
to read the messages they contain. If you do not enter the
ID and the corresponding password, access is denied.
The display shows:
WRITE/SEND SMS
/ Until the display shows:
CONFIGURATION
The display shows:
SERV. CENTRE NO.
/ Until the display shows:
BOX 1
At this point, you can press the
‚
key or the

key to
select, in ascending or descending order, one of the other
4 mailboxes and then press the key or press the
key immediately to confirm the mailbox displayed
(in this case, mailbox 1). The display shows:
BOX 1
-
- Enter, as you do when typing a message text, the ID (max.
5 alphanumeric characters) that you wish to associate with
mailbox 1.
To confirm your setting. The display shows:
PASSWORD 1
-
- Type the password (4 obligatory digits) that you wish to
associate with the corresponding mailbox (in this case,
mailbox 1).
To confirm your setting. The display shows:
BOX 2
At this point, you can abort the procedure by pressing the
key or you can continue to set the other mailboxes
by pressing the key and repeating the procedure
described above.
note
Having programmed a mailbox, to access it to read or print
the received messages, you must always type the password
associated with it.
If the password typed is not correct, the display shows:
"WRONG PASSWORD". If you type the wrong password
twice consecutively, the display shows, for a few seconds,
"AT NEXT ERROR"; "BOX DELETED". At the third attempt,
if the password is still wrong, the fax machine shows, for a
few seconds, the message "DELETED BOX" and then re-
turns automatically to its initial stand-by mode; the mailbox is
then cleared of all its contents.
F
OR AN APPROPRIATE MESSAGE
(
SMS
)
RE
-
CEPTION IF YOU OWN MORE THAN ONE TEL
-
EPHONE SET AND ONLY ONE TELEPHONE LINE
If you must connect other telephone sets to the same tele-
phone line, up to a maximum number of 9 which can re-
ceive messages (SMS), you must identify each of them with
a different terminal number (between 1 and 9) to make
sure that the messages reach the set desired. To give the
fax machine a specified terminal number, proceed as de-
scribed below. As regards other telephone sets, follow the
procedures described by their manufacturers in order to
obtain the same result.
The display shows:
WRITE/SEND SMS
/ Until the display shows:
CONFIGURATION
The display shows:
SERV. CENTRE NO.
/ Until the display shows:
TERMINAL NO.
To confirm your setting. The display shows:
TERMINAL NO.
( 1-9 ) 1
- Press a key from 1 to 9 to identify a terminal different from "1"
so that it can receive the messages sent to it.
To confirm the setting.
To return the fax machine to the initial stand-by mode.