Olivetti Fax-Lab 270, Руководство пользователя

Страница: 4 / 12

2
To confirm your setting. The display shows:
OTHER PARAM.:NO
At this point you can:
- send the message by pressing the key twice.
The fax machine starts sending as indicated at the end of
the procedure;
- go back by pressing the ,
|
/
}
and keys
in order to edit the text or change any of the parameters
selected up to now;
- continue to programme other parameters to:
- ask for notification of delivery of the message .
- send your messages to recipients with a special
confidential mailbox.
- make sure that the SMS service works correctly
when recipients have more than one telephone
connected to the same telephone line
.
As indicated below:
/ To see the other available option:
OTHER PARAM.:YES
To confirm your setting. The display shows:
NOTIFY: YES
/ To see the other available option: "NOTIFY: NO".
"NOTIFY:YES": to receive the notification of message deliv-
ery every time you send one.
"NOTIFY:NO": if you do not want to receive the notification
of message delivery.
To confirm your choice. The display shows:
BOX
- Enter the ID of the recipient’s confidential mailbox (max. 4
alphanumeric characters) as you did to type the message
text.
The display shows:
RECIP.TERM.NO.
(1-9) 1
At this point, if the recipient owns only one telephone set
connected to the telephone line, confirm "1" with ;
otherwise, if the recipient has more than one telephone set
connected to the telephone line, type the number corre-
sponding to the terminal on which he wants to receive your
message and then press . The display shows:
SEND:YES
To confirm your choice.
The fax machine starts transmitting and the message
"TRANSMITTING" appears on display.
If the transmission has been completed successfully, at the
end the message "TX COMPLETED" appears on display
for a few seconds.
Otherwise, if the transmission has not been completed suc-
cessfully, at the end on the display the message "TX ER-
ROR" for a few seconds followed by an acoustic signal and
error led "
" lights on.
In both cases, at the end of the transmission, the display
shows:
SAVE SMS:NO
Press
|
/
}
to see the other available option:
SAVE SMS:YES
At this point, if transmission was aborted, the fax machine
automatically prints the failed transmission report and the
display shows the message "TX ERROR" again. To clear
the message from the display and turn off the error LED
indicator " " press the key .
To confirm your choice.
note
If you have chosen "SAVE SMS:YES", the message "SAVED"
appears on display for a few seconds and your message will
be saved on the list of messages sent "SMS SENT". A t this
point you can always send it again or change it.
note
If, after writing a message, you press or your fax
machine is idle for more than 2 minutes, the text of your mes-
sage will be saved on the list of written messages "SMS WRIT-
TEN".
notE
If the message "MEMORY FULL", "DELETE SMS" appears
on display and the fax machine does not allow you to write the
text of your message, this means that:
- the sent message memory is full
or
- the draft message memory is full
or
- both memories are full.
At this point, delete at least one of the messages from either or
both of the memories (depending on the case). See "
To
delete a message (SMS) " later in the manual.
notE
If there is no power for over an hour, the fax machine will
delete all the messages. To have a record of all the messages
received, refer to the report of power failure that will be auto-
matically printed by the fax machine or require the printout of
activity report (see the instruction manual of the fax machine).