27
T
O
DISPLAY
THE
CALLER
ID
This function, which may be activated by the telephone company on
request by the user,
is only available in some countries
and
conforms
to the
ETSI ETS 300 778-1 standard
.
This function
tells you immediately who is calling
. In this way,
you will be able to decide whether to answer the call or not.
When this function is enabled, if the fax machine is in
stand-by
mode
, whenever a call is received, it
always shows one of the
following items of information
:
number or name of the correspondent
who called you;
PRIVATE
: if the correspondent has chosen not to reveal his iden-
tity to you;
NOT AVAILABLE
: if the correspondent is connected to a telephone
exchange that does not support this service.
If you are
programming
your fax machine and, when an incoming
call is received, want to
know who is calling you
,
you must press
the
key.
It may however happen, if you are connected to a particular kind of
telephone network, that the number of the caller is not displayed on
the fax machine. If this happens, call your local customer engineering
service centre.
T
O
CHANGE
THE
NUMBER
OF
RINGS
This function is only enabled in some countries.
If set in
PHONE/FAX RX
or
TAD/FAX RX
reception mode,
when an incoming call is received, the fax machine auto-
matically recognizes, after
two rings
, whether the call is
being made from another fax machine (
FAX
) or a telephone
(
TEL
).
If you want, you can change the number of rings, as fol-
lows:
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SETU-UP
Until the display shows:
RING COUNT: 02
/
Press
|
/
}
to view the other available values: "01", "03",
"04", "05", "06", "07" and "08". For exemple: "04".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O
CHANGE
THE
RING
VOLUME
Until the display shows:
FAX SET-UP
The display shows:
DATE AND TIME
The display shows:
VARIOUS SETTINGS
Until the display shows:
RING VOLUME:HIGH
/
Press
|
/
}
to view the other available options: "RING
VOLUME:LOW", "RING VOLUME: MED" and "RING
VOLUME:OFF". For example: "RING VOLUME: MED".
To confirm your choice.
To return the fax machine to the initial stand-by mode.
T
O
RECOGNIZE
THE
RING
FREQUENCY
In some countries, local telephone companies offer the pos-
sibility of
assigning the same telephone line two or
more numbers
, corresponding to different users. When
an incoming call is received, a
different ring frequency
will indicate which user is to answer the call.
This function is extremely useful in the home or small offices,
where the same telephone line is shared by more than one
person.
Your fax machine is capable of "learning" one of
these frequencies
(see the procedure that follows). In
this way, when a call with the specific ring frequency is
received, the fax machine (in "
PHONE/FAX RX
" and "
TAD/
FAX RX
" reception modes) prepares exclusively to re-
ceive a document.
This function is
particularly useful when associated
with silent reception
in that the fax machine will only ring
if the call is coming from a telephone.
If the fax machine is connected to an external answering
machine, we recommend you
disconnect it
before acti-
vating the recognition procedure.
Until the display shows:
INSTALLATION
The display shows:
TEL. LINE SETU-UP
Until the display shows:
ENHANCED FEATUR.
Until the display shows:
DISTINC.RING:OFF
All manuals and user guides at all-guides.com
