3
ENGLISH
Operator Display
Your cash register is equipped with a 9-digit numeric Liquid
Crystal Display (LCD). With reference to figure 6, the display
is read from left to right as follows:
1...8
(1) - With the Clerk System active,
indicates the clerk number entered
before working in the R1 or R2 mode,
or when
is pressed.
Department
(2) - A set of digits indicating the
department key pressed for each entry.
Repeat/Multiply
(3) - A number displayed when repeat-
ing or multiplying items to indicate the
number of items entered at one price.
Amount
(4) - Indicates entry amounts and sales
totals.
Special Symbol Indicators
Special symbols appear at the far left-hand side of the display
during cash register operation:
C (Change)
Indicates that the displayed amount is the
change due to the customer.
E (Error)
Indicates when an error is made during
operation or when programming the cash
register. An error tone sounds to alert the
operator.
S (Sub-total) Indicates that the amount shown is the subtotal
of a transaction, including sales tax if
applicable.
= (Total)
Indicates that the amount shown is the
transaction total.
- (Minus)
Displays a negative entry. Also displays if
subtotal or cash tendered total is a negative
number due to a return or refund.
. (Dot)
Indicates calculator mode, receipt off mode
and training mode.
Displayed when
is pressed to indicate
that the amount is displayed in foreign currency.
These symbols clear automatically when you start the next
entry or press
.
Error Conditions
Clearing an Error
Press
to clear an error. The tone ends, the displays
clear and the keypad unlocks, allowing you to continue with
the transaction or restart the program.
If an error condition cannot be cleared by pressing
,
reset the cash register by performing one of the three cash
register reset operations explained in the next section.
Cash Register Reset Operations
If the cash register does not function, for example while
programming and the error signal cannot be stopped by
pressing
, reset the cash register. There are three reset
operations; be very careful when choosing the one to
perform since you could unnecessarily cancel report
data and cash register programming data.
Partial Reset
A Partial Reset operation just clears the cash register's
working memory.
1. Unplug the cash register from the electrical outlet.
2. Press and hold down
and
simultaneously
while plugging the cash register back into its electrical
outlet.
If the cash register still remains in an error condition, proceed
with the Full Reset - Reports operation.
Full Reset Reports
A Full Reset - Reports operation erases the cash register's
working memory, and all totals and counters (all report data).
1. Unplug the cash register from the electrical outlet.
2. Press and hold down
and
simultaneously
while plugging the cash register back into its electrical
outlet.
If the cash register still remains in an error condition, proceed
with the Full Reset - All Data operation.
Full Reset - All Data
A Full Reset - All Data operation erases the cash regis-
ter's working memory, all totals and counters (all report
data) and cancels all cash register programming data.
Be extremely careful when using this reset operation.
Use this method as last resort only.
1. Unplug the cash register from the electrical outlet.
2. Press and hold down
and
simultaneously
while plugging the cash register back into its electrical
outlet.
3. Reprogram the cash register.