Olivetti d-Copia 3000MF, Руководство по эксплуатации

Страница: 186 / 230

Troubleshooting
OPERATION GUIDE 6-5
6
Responding to Error Messages
If the touch panel displays any of these messages, follow the
corresponding procedure.
Alphanumeric
Error Message Checkpoints Corrective Actions
Reference
Page
Acceptable staple
count exceeded. Is the acceptable staple
count exceeded? For
details, refer to
Specifications on page
Appendix-
9,10,11.
Press [Continue] to print without
stapling.
Press [Cancel] to cancel the job. —
Add paper in cassette
1. Is the indicated cassette out
of paper? Load paper. 2-34
Add paper in Multi
Purpose tray. Is the paper of the selected
size loaded in the Multi
Purpose Tray? Load the paper in the Multi Purpose
Tray which is of the size and type
indicated on the touch panel. 2-38
Add staples. Has any of the built-in
finisher or document finisher
run out of staples? If the staples are depleted, the
machine will stop and the location of
staple depletion will be indicated on
the touch panel.
Leave the machine on and follow the
instruction to replace the staple case.
Press [Continue] to print without
stapling.
Press [Cancel] to cancel the job. 4-6
Add toner. – Replace the toner container. 5-7
An error has occurred. – Internal error has occurred.
Turn the main power switch off and
on.
If error occurs repeatedly, make a
note of the error code displayed on
the touch panel, and contact your
Service Representative. —
Box limit exceeded. – Document box is full, and no further
storage is available; the job is
canceled. Press [End]. —
– Repeat Copy box is full, and no
further repeat copy is available.
Press [Continue] to print without
using Repeat Copy.
Press [Cancel] to cancel the job. —