Troubleshooting
6-3
Copies are skewed.
Are the originals loaded correctly?
When placing originals on the platen,
place them face-down and flush
against the original size indicator
plates.
page
2-14
When placing originals in the
document processor, align the original
width guides securely before placing
the originals.
page
2-15
Is the paper loaded correctly?
Check the position of the paper width
guides.
page
2-2
Paper jams frequently
occur.
Is the paper loaded correctly?
Load the paper correctly.
page
2-2
Is the paper of the supported type? Is it
in good condition?
Remove the paper from the cassette,
turn it over, and reload it.
page
2-2
Is the paper curled, folded, or
wrinkled?
Replace the paper with new paper.
page
2-2
Are there any loose scraps or jammed
paper in the machine?
Remove any jammed paper.
page
6-8
Is the paper damp?
Replace the paper with new paper.
page
2-2
Copies from the optional
document processor
have black lines.
Is the slit glass dirty?
Clean the slit glass.
page
5-2
Copies are wrinkled.
Is the separator dirty?
Clean the separator.
page
5-3
Is the paper damp?
Replace the paper with new paper.
page
2-2
Is the paper set in a proper orientation? Change the orientation in which the
paper is positioned.
—
Symptom
Checkpoints
Corrective Actions
Reference
Page
Содержание d-Copia 2500
Страница 1: ...d Copia 2500 d Copia 3000 Cod 541503en GB...
Страница 60: ...3 18 Basic Operation...
Страница 100: ...6 20 Troubleshooting...
Страница 114: ...Index 4...