Olivetti d-color MF451, Руководство пользователя

Страница: 37 / 71

d-Color MF 651/551/451 (Version 2) 3-13
3.2 Configuring the basic settings 3
Staple/Punch Staple:
Copies can be bound with a staple in the corner or with two staples.
Punch:
Copies can be fed out hole-punched.
The number of punched holes varies depending on the country (area)
where this machine is used. For details, contact your service representa-
tive.
Staple/Punch Position Setting Select the desired staple or hole-punch position.
•
[Auto]:
The staple or hole-punch position is automat-
ically set either at the top or at the left.
A staple or punch position along the long side
of the paper is selected if the original length is
11-11/16 in (297 mm) or less.
A staple or punch position along the short
side of the paper is selected if the original
length exceeds 11-11/16 in (297 mm).
• If [Auto] is selected for the staple or hole-
punch position, load the original with the top
toward the back of the machine.
• If desired, press [Original Direction], and then
specify the direction in which the original is
loaded.
Fold/Bind Half-Fold Select this setting to fold copies at the center in
half before feeding them out.
Center Staple & Fold Select this setting to staple copies at the center
before feeding them out.
Tri-Fold Select this setting to fold copies in three before
feeding them out.
Settings
1 1