4
GENERAL ERRORS LIST
MESSAGE
CAUSE
RETURN TO REG
Appears when a sales ticket is open and an attempt is made to
change the operating mode of the cash register.
MAX.LIM.EXCEEDED
Appears when the maximum capacity is exceeded, for
example, when configuring descriptors.
LESS MIN.LIMIT
Appears when the minimum limit is exceeded.
CAPACITY EXCEEDED
Appears when an arithmetic operation causes an overflow in a
register counter.
WRONG SEQUENCE
Appears when the key sequence entered is not permitted in
the current machine condition.
TICKET OPEN
Appears when a ticket is open. The requested operation
cannot be performed until the ticket is closed.
NOT MANAGED
Appears in conditions when a code is not handled.
QUANTITY = 0
Appears when a quantity must be entered but the user
proceeds with the operation without inserting it, for example,
for operations involving the X key.
QUANTITY EXCEEDED
Appears when a quantity counter overflows while performing
certain arithmetic operations.
NOT ALLOWED
Appears when an operation is not allowed.
INSERT AMOUNT
Appears when the mandatory balance calculation option is set
and the user does not enter the amount for its calculation.
SET PRICE
Appears when a price is not programmed for the department
entered.
LALO LIMIT EXCEED
Appears when the sales price of an item is less than the
(LALO) price programmed.
HALO LIMIT EXCEED
Appears when the sales price of an item is greater than the
(HALO) price programmed.
BAL. EXC. HALO
Balance exceeds HALO.
CREDIT LIMIT EXCEEDED
Appears when the maximum credit amount allowed is
exceeded (also for CHIPCARD).
WRONG AMOUNT
Appears when an incorrect amount is entered.
PRICE EXCEEDED
Appears when the amount of the discount applied is greater
than the price of the item sold.
INSER. EXCHANGE
Appears when the exchange value has not been entered in
currency management.
COVER OF PAPER PRESS
OPEN
Appears when the cover of the printer is open.
PAPER MISSING
Appears for the NEAR END OF PAPER condition (not a
blocking error).
END OF PAPER
Appears for the END OF PAPER condition (blocking error)
RUN REP.
Appears when you must run the closure report (Z10) to be
able to perform the operation requested by the user.
