9
RAM AND APPLICATION SOFTWARE RESET PROCEDURE
In the event of an error condition that causes the cash register to crash and the
corrective action described at point 1 of page 2 does not solve the problem, perform
a RAM and application software reset operation to restore the normal operating
conditions.
To activate this procedure:
1.
Power off the cash register by pressing the
key on the operator panel.
2.
Press the ON/OFF switch (located at the rear) turning this to the (O) position.
3.
Wait approximately 20 - 30 seconds.
4.
Press the ON/OFF switch (
located at the
rear) turning this to the (I) position.
5.
Power on the cash register,
press and hold down the
key at the same
time as the
key .
6.
When the touch screen shown the figure below, release the keys.
3000
