Olivetti 3D DESK, Руководство пользователя

Страница: 22 / 64

2-4
Manuale d’uso
386446U-01
5. After the first adjustment is complete, press the jog dialer again. The extruder assembly moves to the
second adjustment position.
6. Now repeat the adjustment as described at point 4 , and press the jog dialer to bring the extruder assembly
to the next adjustment position.
7. The total number of adjustment positions is 4 and, for each of these, the adjustment must be carried out as
described at point
4 .
8. After completing the adjustments, the extruder assembly returns to the Home position and the display
returns to normal.
NOTE: Normally the first layer printed is deposited with a greater thickness than the following layers
(setting the Slicing software appropriately). This expedient can compensate for any small
misalignments.
NOTE: the flatness of the tempered glass cannot be guaranteed with centesimal accuracy therefore
the first layer of the material printed may not be laid uniformly; consequently it is essential to ensure
that the external lines are uniform in order to ensure good adhesion.
The centesimal differences in height are compensated in the next 2-3 layers.
WARNING:
Incorrectly executed height adjustment operations may result in bad printing quality or,
in the worst case, a collision between the hot end and the printing table, causing damage to the
machine.