Olivetti 3D DESK, Руководство пользователя

Страница: 21 / 64

386446U-01
Manuale d’uso
2-3
Figure 2-4 Blue-coloured display screen after Bed Setting is selected
4. Press the jog dialer again.
The extruder assembly moves to the first Adjustment position (there are 4 in total). Try to pass a normal
paper sheet (80 gr.) between the nozzle and the tempered glass. If the paper sheet moves freely between
the nozzle and the glass, you must work on the reference self-locking nut turning it in the clockwise direction
until no light passes between the glass/ gauge/nozzle. In the opposite case
– if the nozzle is too near the
glass (i.e. paper sheet cannot be inserted) - then work on the nut in the opposite direction (i.e. anti-
clockwise), until the right amount of space is left between the nozzle and the table.
Figure 2-5 Adjusting nut positions